Jetson Nano B01 – Dual Raspberry Pi Cameras

The new B01 revision of the NVIDIA Jetson Nano Development Kit adds another MIPI-CSI camera connector. Looky here:

Background

We previously wrote up how to use the Raspberry Pi Version 2.1 camera with the original Jetson Nano A02 kit. Note that several other manufacturers now offer compatible cameras, some with interchangeable lenses.

Note: The V1 Raspberry Pi Camera Module is not compatible with the default Jetson Nano Install. The driver for the imaging element is not included in the base kernel modules.

Installation

Installation of the camera is the same as on the earlier development kit, and the Raspberry Pi. You’ll need a couple of RPi cameras, the new Jetson Nano B01, and so on:

Jetson Nano B01: On the NVIDIA Store

RPi Camera: https://amzn.to/2HVQxIl

Adafruit 5 volt, 4 Amp power supply: https://amzn.to/2Uvd6uc

Installation is simple. On a Camera Connector, lift up the plastic camera cable retainer which holds the ribbon cable in place. Be gentle, the retainer is fragile. You should be able to pry it up with a finger/fingernail or a small screwdriver. Once loose, insert the camera ribbon cable with the contacts on the cable facing inwards towards the Nano module. Make sure that the ribbon cable seats all the way into the connector. The tape on the connector should face towards the outer edge of the board. Then press down on the plastic tab to capture the ribbon cable, applying even pressure on both sides of the retainer. Some pics (natch):

Once you have the cameras installed, you can easily test them. The Gstreamer pipeline element nvarguscamerasrc parameter sensor_id controls which camera is being selected:

$ gst-launch-1.0 nvarguscamerasrc sensor_id=0 ! nvoverlaysink
and:
$ gst-launch-1.0 nvarguscamerasrc sensor_id=1 ! nvoverlaysink

The examples in the CSI-Camera examples have been extended to support the extra parameter. Also, as shown in the video, we’ve added some instrumented examples so that we can get the elapsed time for executing blocks of code, and print the number of frames per second being both read from the camera and displayed on the screen.

Software

On the JetsonHacksNano account on Github, there is a repository named CSI-Camera. There are a couple of simple ‘read the camera and show it in a window’ code samples using OpenCV, one written in Python, the other C++. You can checkout v3.1 to match the video, though releases are bound to change.

$ git clone https://github.com/JetsonHacksNano/CSI-Camera.git
$ git checkout v3.1

For the Python examples you may need to install numpy. You can install it using pip:

$ sudo apt-get install python3-pip

$ pip3 install cython

$ pip3 install numpy

The third demo is more interesting. The ‘face_detect.py’ script runs a Haar Cascade classifier to detect faces on the camera stream. You can read the article Face Detection using Haar Cascades to learn the nitty gritty. The example in the CSI-Camera repository is a straightforward implementation from that article. This is one of the earlier examples of mainstream machine learning.

Mo’ Better Frame Rates

In the ‘instrumented’ folder of CSI-Camera, there are several different works in progress and tools for benchmarking performance. These are written in Python. One of these tools is a very simple minded time profiler which allows you examine the elapsed time for executing a block of code. This is written as a Python class in the file timecontext.py.

You can play with the samples, like we did in the video. Of note is the CSI_Camera class, which allows camera capture to happen in a separate process. On a multi-processor CPU like the Jetson, we typically think of a separate process running on a different CPU. Of course, this is only if another CPU is available. This is all handled transparently by the operating system.

Dealing with the camera hardware in a separate thread provides several advantages. Typically the main thread has a loop (usually referred to as the display loop) which gathers the frame from the camera, processes the frame, displays the frame in a window, and then yields for a short amount of time to the operating system so that other processes can execute. These processes include things like reading the keyboard, mouse movements, background tasks and so on.

The main thread has a limited amount of time for this loop, it’s a pretty close match to the maximum expected frame rate. By reading the camera in another process, we get the benefit of reading the camera frames in a timely manner, regardless of the main loop speed. This helps with obvious frame speed mismatches, say when you are using a camera that is providing 120 fps, but the display loop can only show 30.

Reading through the code, you will see that the camera read saves the latest frame. When the display loop requests the latest frame, the CSI-Camera instance will return the latest frame that it has received from the camera. This effectively skips over any frames that were not consumed by the main loop, essentially discarding them.

Pick Your Frame Size Wisely

Processing video data is all about picking the smallest amount of data that you can get away with and still receive consistent results. Let’s say we have a frame size of 1280×720. Remember that if we ‘halve’ the size to 640×360, we have reduced the number of pixels that we need to process to 1/4 of the full frame! In other words, it takes 4 640×360 frames to make up a full 1280×720 frame. In many cases, this is a reasonable tradeoff. You will notice that many machine learning algorithms also use this trick, using what what we usually think of as thumbnail size images to represent full images.

The Raspberry Pi Camera provides several different frame sizes and frame rates. Pick what best fits your need. Also, remember that the nvarguscamerasrc supports setting the frame rate the camera driver returns. You may find this useful.

Watch the video, play with the code!

Notes

Demonstration environment:

• Jetson Nano Developer Kit – B01
• L4T 32.3.1 (JetPack 4.3)
• OpenCV 4.1.1
• Raspberry Pi Camera Module V2.1

In the video, we also use a Logitech Webcam: https://amzn.to/2HTXkCq with the Cheese application.

The post Jetson Nano B01 – Dual Raspberry Pi Cameras appeared first on JetsonHacks.